Skip to main content

Test Chambers

SlimLine-M Compressor Cooled

SlimLine temperature test chambers are designed for general purpose laboratory and test applications where small chamber size is important, and product loading is relatively low. Both single-stage (-40°C) and cascade (-70°C) cooling options are available.

See Details

Download PDF brochure

Slimline H - Temperature & Humidity

SlimLine-H climatic test chambers are designed for general purpose laboratory and test applications where small chamber size is important, and product loading is relatively low. CFC-free compressor cooling is fitted as standard.

Humidity conditions are controlled by means of a capacitive sensor for long term reliability and accurate operation over a wide range of conditions. An innovative control system gives an extended temperature/humidity range.

See Details

Download PDF Brochure

Slimline-L - Liquid Nitrogen (LN2) Cooled

SlimLine-L temperature test chambers are designed for general purpose laboratory and test applications where small chamber size is important, and product loading is relatively low. Liquid nitrogen (LN2) is used for cooling the chamber, therefore a supply of liquid nitrogen is required (e.g. via a Dewar).

See Details

Download PDF Brochure

Cyclone-M Temperature Cycling chambers

The CYCLONE range is designed for demanding applications (e.g. high load mass/or dissipation). Sharetree use only high quality components in all our chambers with the results that they are highly reliable. The chambers are attractively styled to blend in with modern production and laboratory equipment and available sizes cover a volume range from 200 to 1500 litres.

Cyclone-M chambers are suitable for both constant temperature and temperature cycling applications. Special attention has been given to achieving powerful, evenly distributed air-flow. This ensures consistent conditions throughout the chamber volume and therefore more meaningful test results.

Standard chambers are available with two temperature ranges, using single stage or cascade cooling plant, and with the choice of increased ramp rates through boost heating and cooling options.

CYCLONE chambers are fitted with the SIMPLEtouch touch-screen programmer as standard. This is particularly useful for simplifying the programming of complex cycles.

Product testing during temperature testing is also possible by fitting the Sharetree Product Carrier system. This simplifies mechanical and electrical interfacing of the products and can be extended to include full test and monitoring under computer control.

See Details

Brochures:

CYCLONE-M Temperature Cycling chambers

Product Carriers for Test Chambers

Cyclone-H Temperature & Humidity Test Chamber

The CYCLONE range is designed for demanding applications (e.g. high load mass/or dissipation). Sharetree use only high quality components in all our chambers with the results that they are highly reliable. The chambers are attractively styled to blend in with modern production and laboratory equipment and available sizes cover a volume range from 200 to 1500 litres.

Cyclone-H chambers are suitable for both constant temperature/humidity and temperature/humidity cycling applications. Special attention has been given to achieving powerful, evenly distributed air-flow. This ensures consistent conditions throughout the chamber volume and therefore more meaningful test results.

Standard chambers are available with two temperature ranges, using single stage or cascade cooling plant, and with the choice of increased ramp rates through boost heating and cooling options. A wide range of humidity operating conditions are available.

CYCLONE chambers are fitted with the SIMPLEtouch touch-screen programmer as standard. This is particularly useful for simplifying the programming of complex cycles.

Product testing during temperature testing is also possible by fitting the Sharetree Product Carrier system. This simplifies mechanical and electrical interfacing of the products and can be extended to include full test and monitoring under computer control.

See Details

Brochures:

CYCLONE-H Temperature/humidity chambers

Product Carriers for Test Chambers

Walk-In Test Chambers

The Sharetree range of modular walk-in Test Chambers provide a wide variety of controlled atmospheres. The designs represent the latest 'state of the art' in environmental technology, and incorporate a unique combination of advanced features together with proven reliability.

The walk-in test chambers are of versatile modular construction allowing designs to customer requirements as required. This form of construction has many advantages.

Product handling features such as shelving and trolleys can be easily added to create high volume Burn-in and Life-Test systems.

 

Brochure:

Walk-in Chamber.pdf

Air Conditioning Units (ACUs)

Sharetree Air Conditioning Units (ACUs) are specifically designed for re-circulating conditioned air through a variety of custom built product enclosures, or directly onto products. ACUs provide the ultimate flexability and are used where a standard test chamber cannot easily be fitted around the product. Product enclosures can also be supplied, if required.

These versatile ACUs feature wide temperature and humidity control options, with remote sensing at the load if required.

The Typhoon series are powerful ACUs, suitable for larger enclosures or heavier products.

The SlimLine-ACU series are more economical ACUs, suitable for less demanding applications.

 

Brochures:

Typhoon ACUs.pdf

SlimLine-ACUs.pdf